Whether the parts will actually fit depends on the interface numbers written on the live product page that day, not on the model name you remember. Two frames with similar names can still differ in axle length, rotor limits and seatpost shape; get one of those wrong, and the part will stall after it arrives.
- Open the live product page for the exact model you are ordering — not a memory, and not an old screenshot.
- Copy the interfaces already written on that page, then match them to the parts you already have or plan to buy.
- If a field is not published, do not estimate. Ask before you order.
This page matches parts. It does not choose a model, and it does not explain the standards
Keep the existing entry points apart, so several pages do not compete for the same words.
- If you have not yet decided what this bike is for, which tire-clearance band you need, or whether you can service the standard in five years: use the buyer checklist. In English, see How to Choose a Gravel Bike Frame in 2026. German, Spanish and Polish already have counterparts.
- To understand T47 and UDH themselves, and why they are often written together: see T47 and UDH Gravel Frameset. The Spanish and Polish counterparts interlink with that page. For the hanger definition alone, see What Is a UDH Hanger.
- To check origin, documents, and the ISO 4210 edition and category: see What to Verify on a Chinese Carbon Frameset Before You Order.
- If the model is already chosen and you are about to buy a crank, rear derailleur, wheelset, seatpost or brakes: use the list below and tick each item against the live product page.
The category overview remains on carbon gravel bike frames. For whether the geometry fits, use that model's geometry table, and start with the Gravel Bike Size Chart if you need it.
Work through the list in this order
The page you open is the specific model, still live that day. Similar model names do not mean the interface numbers are the same.
- Bottom bracket: both the standard name and the shell width must be stated; then choose cups for your crank spindle.
- Hanger: is a specific standard written clearly, and not only “replaceable” or “modern hanger”? If you plan a direct mount without a hanger, ask the frame maker first; do not assume it will fit. The principle is on the T47 / UDH page; this page does not expand it.
- Thru-axles: front and rear length, thread pitch, and the frame and fork axle spacing.
- Head tube and headset: head-tube spec, bearing outer and inner diameters, matched to the headset you will actually fit.
- Seatpost: diameter or shape (for example D-shaped or round), and whether the clamp is made for that shape.
- Brakes: mount type, and the maximum rotors allowed front and rear.
- Tire clearance: the maximum width and residual gap listed on the page, then matched to the tire and rim you will actually run.
- Routing: check it the way the page writes it; if no fitting or routing details are listed, ask about your groupset and stem together, and do not assume compatibility.
- Published drivetrain limits: for example the 1× chainring maximum, and whether a 1× front-derailleur cover is provided. If the page says “for SRAM, check with us”, do not infer a SRAM limit from the Shimano line.
If seatpost insertion is not published, do not assume the saddle can still go much higher or lower. The same applies to standover: if it is not published, do not invent a number.
Work a full match on FM366
The figures below were copied from the specification table and data sheet on the FM366 English product page, opened on 19 November 2026 (Asia/Shanghai). The German, Spanish and Polish product pages opened the same day match these interface fields. Check the live page again before you order; a batch may change.
This is the worked example for the method. It is not an invitation to skip the product page of another model, and it is not a comparison of which frame suits which terrain.
| Interface to check | What the FM366 product page wrote that day | What to match when you order parts |
|---|---|---|
| Bottom bracket | T47 85.5 mm | The cups must match the standard and shell width written on this line, then be chosen for the crank spindle; do not offer cups of another width |
| Hanger | UDH (Universal Derailleur Hanger), 1.0 mm Pitch | Choose the rear derailleur for the hanger standard written on that page; if you want a direct mount without a hanger, ask the frame maker first |
| Thru-axles | Front 12×123 mm, 1.5P; rear 12×169 mm, 1.0P. The data sheet also lists the fork at 12×100 mm and the rear spacing at 12×142 mm | Length and pitch must both match; do not reuse axle lengths from another model |
| Head tube / headset | 1-1/2" upper and lower (integrated); head tube 52 mm ID, 56 mm OD. Bearings: 52 mm OD, 40 mm ID, 8 mm upper height, 7 mm lower height | Choose the headset by this set of dimensions, not by the word “integrated” alone |
| Seatpost | Aero D-type, 7×7 mm / 7×9 mm | It must be the matching D-shaped seatpost; do not stock a round post. Insertion is not published on that page; ask if you need it |
| Brake mount | Disc, Flat Mount | The caliper mount must be Flat Mount |
| Maximum rotors | Front 160/180 mm, rear 140/160 mm | Front and rear limits differ; do not order a rear rotor as if both ends allowed 180 mm |
| Tire clearance | 700c × 57 mm; residual gap 6 mm | Check the measured width of the tire and rim you will actually run, and leave room for mud. See 57mm Gravel Tire Clearance |
| Routing | The English product-page body mentions internal cable routing; the spec table does not list fittings or routing details on their own | Ask about the groupset, the stem, and hose or housing diameter together. See Internal Cable Routing on Gravel Bikes if you need it |
| Drivetrain limits (as written on that page) | The English page writes: Shimano chainline 49.7 mm, maximum 46T for 1×; for SRAM, check with us. The spec table writes 1×12 / 2×12 Shimano or SRAM, with a cover provided for 1× | Treat only the limits written on the page as checked; do not infer a SRAM chainring limit from the Shimano line |
If downtube storage is the main intent, go to Downtube Storage for Gravel and start with FM336. This page does not rank that choice.
Size range: XS, S, M, L, XL. For fit, use Stack and Reach on that page's geometry table; the page does not publish standover, and this page does not add it. Package contents follow the live product-page description.
Do not mix parts just because a few abbreviations on the spec sheet match
For a frame swap, compare seatpost shape and insertion, front and rear axle lengths and thread pitches, and rotor clearance. Use the figures on the exact model page.
For sizing help, send your height, inseam, shortlisted frame size, and the stack and reach of a bike that fits you.
Before you send a parts order or a frame enquiry, run through this list
Put the product page and the parts list side by side. If one item is missing, the check is not finished.
- Bottom-bracket standard and shell width already match the crank and cups you plan to use.
- The hanger has been checked against the standard written on that page; if you plan a direct mount without a hanger, you have asked the frame maker separately.
- Front and rear axle length, pitch and spacing already match the wheelset and the frame and fork.
- Headset dimensions already match the head tube.
- Seatpost shape or diameter already matches; if insertion is not on the page, you have asked, and have not assumed it.
- Brake-mount type and front and rear maximum rotors already match.
- The measured width of the target tire falls inside the clearance and residual gap listed on the page.
- Routing has been checked as the page writes it; any fitting or stem details that are not on the page have been written into the enquiry.
- 1× / 2×, the chainring limit and the front-derailleur cover have been checked against the live description on that page; limits have not been copied from another model.
In the enquiry or order email, please state: model and size, crank model, how the rear derailleur will mount, which axle and rotor set you plan to use, whether the seatpost is new or reused, and the target tire and rim. Do not just send two abbreviations and call it done.
Match the numbers first, then order the parts
Open the live product page first, copy the interfaces in full, then buy the crank, rear derailleur, wheelset, seatpost and brakes. The method is demonstrated on the FM366 page; for any other model, use only the fields written on that page that day, and do not carry the numbers from this table across.
For documents and tests, go back to What to Verify on a Chinese Carbon Frameset Before You Order. For use and fit, go back to the buyer checklist. For the principles of T47 and UDH, go back to T47 and UDH Gravel Frameset. This page does not replace those three.
Sources
- Division of roles (this page does not rewrite them): What to Verify on a Chinese Carbon Frameset Before You Order; How to Choose a Gravel Bike Frame in 2026; T47 and UDH Gravel Frameset
Huizhou, Guangdong, China · info@mondincecycle.com
Compare carbon gravel frames by bottom bracket, hanger and size before checking the exact model.