To build a gravel bike, choose the frameset and lock the interfaces first, then buy the groupset, wheels and tires.
- A frameset is not a complete bike. On the FM366 product page, the kit currently lists the frame, fork, seatpost, front derailleur cover, headset, bag and axles. Custom painting and shipping are not included. The drivetrain, wheels, tires, brake calipers and cockpit are purchased separately.
- There are many bottom bracket standards, and most are not directly interchangeable. BikeRadar recommends establishing the standard used on the bike and sticking to it, or asking a mechanic at a bike shop.
- Hanger shapes are usually made for a specific frame. BikeRadar also notes that hangers come in various shapes and are usually frame-specific, though SRAM's Universal Derailleur Hanger is used as a standard on a growing number of mountain bikes.
- So do not stockpile parts and then hunt for a frameset that will accept them. Open the product page for the frameset you plan to buy, and match the parts to the specifications written there. This is the same approach as Match parts to the live interface list; this article does not repeat that table.
FM366 as shown on the product page. The photo shows the frame, fork and seatpost; the kit also includes the front derailleur cover, headset, bag and axles.
When you have chosen a frameset, lock these points before you order parts:
- Size: start with the Gravel Bike Size Chart and the Bike Frame Size Calculator, then confirm the size on the product geometry table.
- Interfaces: bottom-bracket name and shell width, hanger, axle lengths and thread pitches, seatpost shape, brake mount and maximum rotor size, and tire clearance. For the standards, see T47 and UDH Gravel Frameset. Before you order, copy the live product page using Match parts to the live interface list.
- On the FM366 product page used for this example: the bottom bracket is T47 85.5 mm, the hanger is UDH (1.0 mm pitch), tire clearance is 700c × 57 mm, the brake mount is Flat Mount, maximum rotors are 160/180 mm front and 140/160 mm rear, the front axle is 12×123 mm × 1.5P, the rear axle is 12×169 mm × 1.0P, and the seatpost is an aero D-type post. Use the numbers on the product page at the time you order; do not rely on the model name.
- If you are still comparing framesets, start on Carbon Gravel Bike Frames and Framesets and How to Choose a Gravel Bike Frame in 2026, then come back to these build steps.
Confirm the starting size, then compare stack and reach on the product geometry table.
Buy the interface-locked parts first
After the frameset arrives, buy the parts that have to match the interfaces first, then the cockpit and saddle, which are easier to change.
The frameset already includes some of the parts. On the FM366 product page, the kit includes the frame, fork, seatpost, front derailleur cover, headset, bag and axles. The drivetrain, wheels, tires, brake calipers, cockpit and saddle are not in the kit. Custom painting and shipping are not included in the listed price.
Buy these first, because they have to match the specifications on the product page:
- Drivetrain: match the bottom bracket and the hanger first. The FM366 product page lists a T47 85.5 mm bottom bracket and a UDH hanger (1.0 mm pitch). The front derailleur mount supports 1×12 or 2×12, for Shimano or SRAM; for a 1× build, use the front derailleur cover in the kit. Most bottom-bracket standards are not directly interchangeable; BikeRadar recommends matching the standard written for the bike. The product page also reminds you to check crank and chainring clearance before you order.
- Wheels: match the axles in the kit and the disc-brake standard. The FM366 product page lists a 12×123 mm × 1.5P front axle and a 12×169 mm × 1.0P rear axle. Do not buy a second set of axles that will not fit, and do not guess wheel specifications from the model name.
- Tires: read the tire clearance on the product page first. The FM366 product page lists 700c × 57 mm. How wide a tire will actually fit also depends on the rim's internal width and the terrain you ride; do not order from that one number alone.
- Brakes: match the mount and the maximum rotor size. The FM366 product page lists Flat Mount, with a 160/180 mm maximum at the front and a 140/160 mm maximum at the rear. Choose calipers and rotors within those limits, not larger.
On FM366, match the crank to the T47 85.5 mm shell and the rear derailleur to the UDH hanger.
The cockpit, saddle and pedals can come later. The seatpost is already in the kit; on FM366 it is an aero D-type post compatible with 7×7 mm / 7×9 mm saddle rails. Handlebars and saddles mainly affect ride feel, and they are easier to change than the bottom bracket, hanger and axles, so you do not need to buy them before the frameset is settled.
For the standards, stay on T47 and UDH Gravel Frameset. Before you order, check the product page against Match parts to the live interface list. This section does not repeat those tables.
Check again before you build, and before custom paint
Before you start the build, check the interfaces against the product page again. If you want custom paint, the downtube storage cover is not included in that paint.
This is a pre-assembly check, not a workshop manual, and it does not add torque figures. Follow the component maker's torque and assembly instructions.
Check in this order:
- Confirm the size you already chose. Compare stack and reach on the product geometry table. If you need a starting size again, go back to the Gravel Bike Size Chart and the Bike Frame Size Calculator.
- Then match the parts you bought to the specifications on the product page at that time: bottom bracket, hanger, axles, seatpost, brake mount and maximum rotors, and tire clearance. For FM366, use the numbers on the product page, as in the previous section; do not rely on the model name.
- Before you install the crank and chainrings, check clearance, as the FM366 product page reminds you.
- Do not exceed the tire clearance written on the product page. FM366 lists 700c × 57 mm. Once the tire is mounted, also look at the rim's internal width and the actual space around the frame, and do not force a tire in just because it is under that limit.
- After the interfaces match, fit the cockpit, saddle and pedals.
The downtube storage cover is excluded from custom painting. The bag in the kit is a bag, not this cover.
Confirm these two points about paint and downtube storage before you order:
- Custom painting is not included in the kit price. The final delivered price is confirmed in the quotation.
- The FM366 product page states that the storage cover is excluded from custom painting. The bag in the kit is not this cover. If you want the cover to match the frame color, confirm that separately when you order; do not assume it will be painted with the frame.
- The product page also describes integrated downtube storage with 1.2L capacity. That capacity comes from the page's existing description, not from a separate measurement.
For the item-by-item check, use Match parts to the live interface list. This section does not repeat that table.
After the frameset is settled
Once the frameset and interfaces are settled, then buy the groupset, wheels and tires, and the build will go more smoothly.
If you are still comparing framesets, start on Carbon Gravel Bike Frames and Framesets. If you have already chosen FM366, open the product page and match the parts to the specifications written there. For size, go back to the Gravel Bike Size Chart and the Bike Frame Size Calculator. Before you order, use Match parts to the live interface list.